film capacitors - power factor correction phasecap compact capacitors series/type: mkk400-d-5-02 ordering code: B25673A4052A000 date: 2014-09-8 version: 3 ? epcos ag 2014. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! please fill in the table and then change the color to "white". this ensures that the table disappears (invisible) for the customer pdf. don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! identification/classification 1 (header 1 + top left bar): film capacitors - power factor correction identification/classification 2 (header 2 + bottom left header bar): phasecap compact capacitors ordering code: (top right header bar) B25673A4052A000 series/type: (bottom right header bar) mkk400-d-5-02 preliminary data (optional): (if necessary) department: cap film p pm date: 2014-09-8 version: 3
film capacitors - power f actor correction B25673A4052A000 phasecap compact capacitors mkk400-d-5-02 cap film p pm 2014-09-8 please read cautions and warnings and page 2 of 7 important notes at the end of this document . construction ? dielectric: polypropylene film ? non-pcb, semi-dry biodegradable resin ? concentric winding ? wave cut ? extruded round aluminium can with stud ? provided with ceramic discharge module ? overpressure disconnector. features ? three-phase, delta connected ? self-healing technology ? naturally air cooled (or forced air cooling) ? indoor mounting typical applications ? for power factor correction terminals ? optimized capacitor safety terminals mounting ? threaded stud at bottom of can (max. torque for m12 = 10 nm)
film capacitors - power f actor correction B25673A4052A000 phasecap compact capacitors mkk400-d-5-02 cap film p pm 2014-09-8 please read cautions and warnings and page 3 of 7 important notes at the end of this document . technical data and specifications * without discharge resistor maximum ratings v max (up to 8 h daily) 440 v ac rms / 622 v peak v max (up to 1 min) 520 v ac rms / 735 v peak i max up to 2.2 ? i r (a) including combined effects of harmonics, overvoltages and capacitance tolerance* i s 400 ? i r (a) v tc imp 8000 vpk (standard 1.2/50 ? s impulse) *care must be taken to ensure that the maximum permissibl e voltages and operating tem peratures are not exceeded test data v tt 900 v ac / 50 hz for 10 s v tc 3000 v ac / 50 hz for 10 s characteristics mkk400-d-5-02 rated capacitance c n 3 ? 33.2 f tolerance ?5 / +10% connection d (delta) rated voltage v n 400 v ac rated frequency f n 50 hz 60 hz output 5.0 kvar 6.0 kvar rated current i r 7 a 9 a tan 0 (dielectric) ~0.2 w / kvar w n 16 ws r s 3.19 m ? r is ? c 30000 s *tan (50 hz) 0.3 w / kvar design data dimensions (d x h) 85 x 125 mm weight approx 0.7 kg impregnation non pcb, semi-dry biodegradable resin fixing threaded bolt m12 max. torque (al can stud) 10 nm mounting position any mounting position possible. see ?maintenance and installation manual? for further details.
film capacitors - power f actor correction B25673A4052A000 phasecap compact capacitors mkk400-d-5-02 cap film p pm 2014-09-8 please read cautions and warnings and page 4 of 7 important notes at the end of this document . m ax. allo wable po wer lo ss at specific ambient temp. b 25673a 4052a 000 0 1 2 3 4 15 35 55 75 95 ? amb p max m ax. allo wable current (rms) at specific ambient temp. b 25673a 4052a 000 0 2 4 6 8 10 12 15 35 55 75 95 ? amb i max m ax. allo wable ambient temp. at specific po wer lo ss b 25673a 4052a 000 15 30 45 60 75 90 01234 ? amb p max m ax. allo wable ambient temp. at specific current (rms) b 25673a 4052a 000 15 30 45 60 75 90 036912 ? amb i max climatic category ?40/60 ? min ?40 oc ? max 60 oc storage temperature ?40 oc?.+85 oc ? hotspot max. 85 oc maximum power loss at ? ambient p max at ? ambient 1.5 w 55 oc 1.0 w 65 oc 0.5 w 75 oc 0 w 85 oc humidity av. rel. < 95% degree of protection ip 20 maximum altitude 4,000 m
film capacitors - power f actor correction B25673A4052A000 phasecap compact capacitors mkk400-d-5-02 cap film p pm 2014-09-8 please read cautions and warnings and page 5 of 7 important notes at the end of this document . mean life expectancy t ld up to 200 000 hours (temperature class ?40/c) ; ? hs ? 70 ? c up to 150 000 hours (temperature class ?40/60) ; ? hs ? 70 ? c max. 10000 switchings per year terminals protection degree isolated terminals, ip20 max. torque 1.2 nm terminal cross section 16 mm 2 maximum terminal current 50 a creepage distance (min) 12.7 mm clearance (min) 9.6 mm safety mechanical safety overpressure disconnector max. short circuit current (afc: 10 ka) discharge resistor time 60 s to 75 v or less reference standards iec 60831?1/2, ul 810-5th edition
film capacitors - power f actor correction B25673A4052A000 phasecap compact capacitors mkk400-d-5-02 cap film p pm 2014-09-8 please read cautions and warnings and page 6 of 7 important notes at the end of this document . label design
important notes page 7 of 7 the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons , it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must theref ore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?general terms of delivery for products and services in the electrical industry? published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, pqsine, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
